61 35 040 Removing and installing/replacing fuse box (SPEG)

Necessary preliminary tasks:

Disconnect plug connection (1).

NOTE: Write down color and position of plug connectors before removing.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Clip positive battery cable out of holder (1).

Detach positive battery cable from fuse box (2).

Fig 3: Detaching Positive Battery Cable From Fuse Box

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Tightening torque 61 35 7AZ .

Remove fuse box (2).

Fig 4: Removing Fuse Box

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure journal (1) is correctly seated in guide (2).

Fig 5: Identifying Journal And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: