61 31 241 Removing and installing/replacing bonnet/hood contact switch
NOTE:
Graphic shows the R56 by way of example, deviations in detail are possible in other models.
Disconnect plug connection (1).
Release latch mechanisms (2) with a suitable tool.
Remove engine compartment lid contact switch (3) from bracket (4) in direction of arrow.
Disconnect plug connection (1).
Release latch mechanisms (2) with a suitable tool.
Remove engine compartment lid contact switch (3) from bracket (4) in direction of arrow.
Installation note:
Ensure engine compartment lid contact switch (3) is correctly seated in bracket (4).