35 40 001 Removing and installing/replacing accelerator pedal module

When replacing control unit:

Take off cover (1).

Fig 1: Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release socket head cap screw (1).

Installation:

Tightening torque 35 40 1AZ

Feed out accelerator pedal module (2) towards top.

Fig 2: Accelerator Pedal Module And Socket Head Cap Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove accelerator pedal module.

Fig 3: Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.