61 21 Battery with terminal
WARNING: This page is about a different variant/trim than selected.
BATTERY VAPOR SEPARATOR TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Positive/negative battery terminals | R50 / R52 / R53 / R55 / R56 | M6 | 5 Nm | |
| 2AZ Upper retaining band/retaining bracket | R50 / R52 / R53 | M6 | 6 Nm | |
| 3AZ Mountings/battery container | R50 / R52 | 8 Nm | ||
| 4AZ Battery negative lead to bulkhead/body | R50 / R52 / R55 / R56 | M8 | 19 Nm | |
| 5AZ Fuse box | R55 / R56 | M8 | 15 Nm | |
| R55 / R56 | M6 | 8 Nm | ||
| R55 / R56 | M5 | 5 Nm | ||
| 6AZ Battery positive lead an B+ terminal | R55 / R56 | M8 | 15 Nm |