41 00... Information On Metal Filler: Processing
WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
The working temperature of the metal filler must be at least 18°C.
A = Metal filler
B = Hardener
NOTE:
The mixture ratio refers to the volume.
Mix metal filler in mixture ratio of 5:2. Mix components thoroughly and free of pores.
IMPORTANT:
Do not stir components. Danger of air pockets in metal filler!
Working life of the metal filler is approx. 45 minutes.