51 13 124 Removing And Installing/Replacing Right Cowl Panel Cover

Remove gasket (1).

Release nut (2) and screw (3).

Unclip cover (4) towards top from retaining strip (5) and feed out.

Installation: 

Make sure cover (4) is correctly seated on retaining strip (5).

Fig 1: Identifying Cover, Gasket And Retaining Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seals (1) on cover (2) must not be damaged.

Fig 2: Identifying Seals On Cover

Courtesy of BMW OF NORTH AMERICA, INC.