51 13 105 Removing And Installing/Replacing Trim On Rear Left Or Right Wheel Arch

Release clip (1).

Fold wheel arch trim (2) inwards slightly and release clip (3).

Installation: 

If necessary, replace faulty clips (1 and 3).

Fig 1: Identifying Wheel Arch Trim And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Feed trim (1) in area (A) towards rear out of bumper.

Release trim (1) at clips (2) and remove.

Installation: 

If necessary, replace faulty clips (2).

Fig 2: Identifying Trim And Clips

Courtesy of BMW OF NORTH AMERICA, INC.