51 13 102 Removing And Installing/Replacing Cover On Front Left Or Right Wheel Arch

If necessary, release clip on wheel arch trim (1).

Bend wheel arch trim (1) inwards slightly and release clip (2).

Installation: 

If necessary, replace faulty clip (2).

Fig 1: Identifying Trim And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Feed trim (1) in area (A) towards front out of bumper.

Release trim (1) at clips (2) and remove.

Installation: 

If necessary, replace faulty clips (2).

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.