51 16 200 Removing And Installing/Replacing Storage Compartment

Necessary preliminary tasks:

Version with manual gearbox:

Version with automatic transmission:

Version with center armrest:

Release side screws on trims (1).

Unclip trims (1) in direction of arrow from each other and remove.

Release screw (2).

Unclip drinks holder (3) in upward direction and remove.

Fig 1: Unclipping Trims

Courtesy of BMW OF NORTH AMERICA, INC.

Version without center armrest:

Release screw (1) and remove drinks holder (2).

Fig 2: Identifying Drinks Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip gaiter (1) towards top.

Release bolts (2).

Release storage compartment (3) at clips (4).

Raise storage compartment (3) slightly and disconnect associated plug connections.

Feed out storage compartment (4) towards top.

Fig 3: Identifying Gaiter, Storage Compartment And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: