52 13 010 Removing and installing/replacing both seat rails on left or right front seat
Necessary preliminary tasks:
- Remove front seat, see Removing and installing driver's or front passenger seat (normal / manual)
- Seat height to stop
- Remove outer cover, see Removing and installing/replacing outer cover on left or right front seat
Disconnect Bowden cable (1).
Unclip Bowden cable sleeve from holder.
Release screws (1).
Release screws (1).
Lever out locking clip.
Remove seat rail from adjusting bracket (1) and unlocking linkage (2).
Installation:
Unlocking linkage must rest on locking pawl.
Lever out locking clip.
Remove seat rail from adjusting bracket (1) and unlocking linkage (2).
Installation:
Unlocking linkage must be attached to pin.