61 12 200 Replacing Wiring Harness In Left Or Right Front Door

Necessary preliminary tasks:

Disconnect plug connection (1).

Unclip door wiring harness at points (2).

Installation:

Make sure door wiring harness is correctly laid.

Fig 1: Identifying Door Wiring Harness Points

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip door wiring harness at points (2).

Pull in rubber grommet (3) on inside of door.

Installation:

Make sure door wiring harness is correctly laid.

Fig 2: Identifying Rubber Grommet

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1), fold door wiring harness plug on A-pillar (2) downwards slightly and remove.

Disconnect plug connection behind.

Pull rubber grommet (3) out of front door.

Feed out door wiring harness towards front to A-pillar.

Fig 3: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.