61 61 01. Adjusting Left Or Right Windscreen Wiper
Special tools required:
Correctly adjusting the contact angle of the wiper arms on the windscreen increases wiping quality .
A/B= Distance between windscreen wiper blade (2) and trim panel on cowl panel (1)
NOTE:
Measurement is taken at the height of the locators (3) for the windscreen wiper arms
C= Contact angle between wiper blade center plane and windscreen
When adjusting with special tool 61 6 100 , set the scale value in accordance with the following table.
For RHD cars, change the preceding sign of the scale values.
- LHD cars, scale range 0 to -10
- RHD cars, scale range 0 to +10
SCALE RANGE SPECIFICATION
| Model | Contact angle (C) on windscreen wiper arm | Scale value (LHD) on special tool | Adjustment dimension (A, B) on windscreen wiper arm | ||||
|---|---|---|---|---|---|---|---|
| Passenger side | Driver side | Passenger side | Driver side | Passenger side | Driver side | Rear end | |
| R50/R52/R53/R56 | 87° ± 1° | 87° ± 1° | -3 | -3 | 59 ± 2.5 mm | 49 ± 2.5 mm | 44 ± 3 mm |