51 13 022 Removing And Installing/Replacing Engine Bonnet/Hood Air Guide

Raise bonnet/hood.

Release screw (1).

Fig 1: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Detach air guide (1) in upward direction from clips (2).

Installation: 

If necessary, replace faulty clips (2).

Fig 2: Detaching Air Guide In Upward Direction From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace defective grommets (1).

Fig 3: Identifying Grommets

Courtesy of BMW OF NORTH AMERICA, INC.