51 43 006 Replacing Decorative Strip On Left Or Right Side Trim Panel
Necessary preliminary tasks:
- Remove side trim panel. See REAR SIDE TRIM PANEL (COOPER/COOPER S) or REAR SIDE TRIM PANEL (JCW GP) .
Drill out welding spots (1) on side trim panel (2) and remove decorative strip.
NOTE:
Only drill down to side trim panel area (2) so as not to damage the contact surface.
Remove all remnants of plastic from contact surface of side trim panel (2).
Installation:
Place decorative strip on side trim panel.
Secure welding pins (2) with locking washers (1).
Shorten welding pins (1) down to measurement (A).
A = 2 mm