51 21 351 Replacing Window Cavity Cover Strip On Inside Of Front Door

Necessary preliminary tasks: 

• Remove DOOR TRIM PANEL CARRIER 

Pull window cavity cover strip (1) off retaining plate (2).

Installation: 

Coat window cavity cover strip (1) with water before fitting.

Fig 1: Pulling Window Cavity Cover Strip Off Retaining Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Only window cavity cover strips (1) with sealing lips (2) may be fitted.

Build date up to 12/2006: 

In order to correctly install a new window cavity cover strip (1), it may be necessary to remove fleece (3) and transparent spacers from reinforcement (4).

Fig 2: Identifying Window Cavity Cover Strips, Fleece And Reinforcement

Courtesy of BMW OF NORTH AMERICA, INC.