41 11 141 Replacing Cover For Left Or Right Longitudinal Member
Refer to relevant service information in BODY, GENERAL .
Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.
Use only approved SPOT-WELDING APPARATUS for repairs.
The following new body parts are required:
- (1) Side frame, outer
Mark severance cuts in accordance with illustration and cut.
CAUTION:
Cut outer plate only for following severance cuts.
Dimension a = approx. 35 mm before elongated hole dia. 12 x 18 mm.
Dimension b = approx. 25 mm before bore hole dia. 12 mm.
Open weld joints in areas (1).
Installation:
Mark new part in accordance with severance cuts above and cut.
Weld in reinforcing panels at all severance cuts.