41 12 535 Replacing Complete Rear Luggage Compartment Floor (Tail Panel Removed): Notes

Refer to relevant service information in BODY, GENERAL .

The following new body parts are required:

• (1) Luggage compartment floor
• (2) Rear silencer holder (not depicted)

Fig 1: Identifying Luggage Compartment Floor

Courtesy of BMW OF NORTH AMERICA, INC.

Open welding spots in areas (1).

Fig 2: Identifying Welded Spots Area

Courtesy of BMW OF NORTH AMERICA, INC.

View from vehicle underbody:

Open welding spots in areas (1).

Remove the boot floor.

Fig 3: Identifying Welded Spots Area

Courtesy of BMW OF NORTH AMERICA, INC.