65 83 570 Removing and installing/replacing CD drive for Car Communication Computer

Special tools required:

Necessary preliminary tasks:

If necessary, cut through warranty seal.

Raise cover (1) with special tool 64 1 020 all round and remove from Car Communication Computer (2).

Fig 1: Cover, Car Communication Computer, Special Tool (64 1 020) And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed CD drive for Car Communication Computer (2) in direction of arrow out of Car Communication Computer (3) and set down.

Installation:

Ensure correct routing of cables.

Fig 2: Mounting Screw, CD Drive, Car Communication Computer And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove CD drive trim (2) in direction of arrow from CD drive for Car Communication Computer (3).

Installation:

Ensure correct routing of cables.

Fig 3: Mounting Screws, CD Drive Trim, Car Communication Computer And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Cut through warranty seal (1) at marked point.

Release screw (2).

Lift side cover out of mounting (3) and carefully place to one side.

Fig 4: Warranty Seal, Retaining Screw And Mounting

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove CD drive.

Installation:

Ensure correct routing of cables.

Fig 5: CD Drive Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.