61 71 061 Replacing Fluid Reservoir For Windscreen Washer System

Necessary preliminary tasks:

Release expander rivet (1) on fluid tank for windscreen washer system (2).

Fig 1: Identifying Expander Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove retaining clip (2) from fluid reservoir for windscreen washer system.

Release screws (3).

Fig 2: Identifying Plug Connection And Hoses

Courtesy of BMW OF NORTH AMERICA, INC.

Remove level switch for windscreen washer system.

Remove windscreen washer pump.

Remove washer pump for headlight cleaning system.

Lift out fluid reservoir for windscreen washer system from opening (2) using a suitable tool.

Thread out fluid reservoir for windscreen washer system.

Installation note:

Guide (1) must be correctly seated in opening (2).

Ensure hose pipes and wiring harness are laid without kinks.

Fill fluid reservoir.

Fig 3: Identifying Guide And Seat

Courtesy of BMW OF NORTH AMERICA, INC.