61 62 030 Replacing (Removing And Installing) Wiper Arm For Rear Window Wiper

Special tools required:

61 6 210

(see GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS )

Open protective cap (1).

Slacken nut (3) two turns.

Tightening torque 61 62 1AZ .

IMPORTANT: To avoid damaging the spray nozzle, it is necessary in addition to the special tool to use a suitable socket for detaching the rear window wiper from the wiper motor.

Press off wiper arm (2) with special tool 61 6 210 and suitable socket (4).

Unscrew nut (3).

Remove wiper arm (2).

Fig 1: Identifying Special Tool (61 6 210)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Rear window wiper must be in rest position.

Adjust distance (1) between wiper arm and rear window edge.

(1) 44 mm

Replacement:

Remove and install rear window wiper blade .

Fig 2: Identifying Distance Between Wiper Arm And Rear Window Edge

Courtesy of BMW OF NORTH AMERICA, INC.