65 12 220 Removing and installing/replacing the satellite tuner

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

NOTE: Follow INSTRUCTIONS FOR HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

Remove right FRONT SEAT .

Release screws (1).

Remove satellite tuner (2) with holder.

Unfasten plug connections (3) and disconnect.

Replacement:

Release screws on satellite tuner holder.

Remove satellite tuner (2) from holder.

Fig 1: Identifying Screws, Satellite Tuner And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing, please observe:

Record ID number (2) of the removed device.

NOTE: The ID number (2) can be found on the label of the housing. Above the barcode the text reads "Sirius ID" (1) and next to it is the company's logo "Sirius Satellite Radio" (3).

Record ID number (2) of the new device.

Fig 2: Identifying Sirius ID, ID Number And Sirius Satellite Radio

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle PROGRAMMING/ENCODING .

NOTE: Please contact Sirius. Use the ID number to cancel current device and register new one.