6581060 Removing and installing/replacing outside temperature sensor (from 08/2010)

Feed out front wheel arch panel (2) in bottom area, as shown.

Unclip outside temperature sensor (3) by accessing wheel arch from bumper panel (1).

Installation note: 

Outside temperature sensor must be locked in area (4).

Make sure outside temperature sensor is securely seated (3).

Fig 1: Locating Outside Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove the outside temperature sensor (2).

Fig 2: Identifying Outside Temperature Sensor And Connector

Courtesy of BMW OF NORTH AMERICA, INC.