33 33 040 Removing and installing/replacing reinforcement plate
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without reinforcement plate is not permitted!
Driving without reinforcement plate is not permitted!
Necessary preliminary tasks:
Release screws (1).
Tightening torque 51 61 16AZ .
Installation note:
Replace screws (1).
Unfasten screws (2).
Tightening torque 33 33 5AZ .
Remove reinforcement plate to the rear.