22 31 005 Removing and installing/replacing transmission support bracket
Necessary preliminary tasks:
- Disconnect BATTERY
- Remove INTAKE FILTER HOUSING
- Remove CONTROL UNIT
- Support engine / transmission with car jack
Release screws (1).
Push fuse box to one side.
Tightening torque 61 13 1AZ
Release screws (1).
Remove holder (2).
Release screws (1).
Tightening torque 22 32 2AZ
Slacken nut (2).
Tightening torque 22 32 3AZ
Remove transmission support bracket.