31 35 000 Removing And Installing/Replacing Front Anti-Roll Bar

Necessary preliminary tasks: 

• Lower front axle support. See LOWERING WITH UNIVERSAL LIFTER  or LOWERING WITH SWZ00-2040 .

Unscrew nut (1).

If necessary, grip at dihedron (2) or at hexagon socket.

Installation: 

Replace self-locking nut.

Tightening torque: 56 Nm

Release bolts (1) on left and right and remove stabilizer.

Installation: 

Tightening torque: 165 Nm

Replace RUBBER MOUNT  for stabilizer (2).