31 33 100 Removing and installing/replacing coil spring for left or right front spring strut
WARNING: This page is about a different variant/trim than selected.
Installation note:
- All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
- Retaining elements on chassis and suspension and steering parts must be replaced.
IMPORTANT:
Both coil springs on the relevant axle must be replaced only in the event of corrosion breakage!
NOTE:
The coil spring is allocated in the BMW Electronic Parts Catalogue (EPC) under the "Spring table" menu item after the vehicle identification number has been entered and the optional equipment of the particular vehicle has been selected.
IMPORTANT:
Both coil springs on the relevant axle must be replaced only in the event of corrosion breakage!
NOTE:
Procedure is described in REPLACING FRONT LEFT OR RIGHT SPRING STRUT .
After installation:
- Check HEADLIGHT ADJUSTMENT , correct if necessary.