00 00... Underbody incl. all visible components: checking for damage, leaks, corrosion
WARNING: This page is about a different variant/trim than selected.
- Visually inspect underbody:
- For leaks (transmission, fuel system, brake components, steering)
- For correct routing of electrical leads (brake pad sensor, pulse generator)
- Damage to underbody
- Corrosion on underbody
IMPORTANT:
If damage to the underbody is identified:
- If necessary, remove panels from underbody.
- Check mountings and fixtures and brake and fuel lines for damage and correct installation position.
Rectify identified faults after consulting with customer and issue a separate invoice.
- Visually inspect underbody:
- For leaks (transmission, brake components, steering)
- Damage to underbody
- Corrosion on underbody
IMPORTANT:
If damage to the underbody is identified:
- If necessary, remove panels from underbody.
- Check mountings and fixtures and brake and fuel lines for damage and correct installation position.
Rectify identified faults after consulting with customer and issue a separate invoice.