00 00... Tires: checking inflation pressure, correcting if necessary, checking external condition, tread depth and pattern

WARNING: This page is about a different variant/trim than selected.

Checking tire inflation pressure:
- Check tire inflation pressure in accordance with information plate on B-pillar
- Initialize Run Flat Indicator . See TIRES WITH EMERGENCY RUNNING CHARACTERISTICS AND TIRE PRESSURE WARNING SYSTEMS .
Checking tire condition:
- Check tread depth of all tires with tire tread gauge
- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tire tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer

NOTE:

For reasons of driving safety, only use tires of the same type and tread pattern on a single vehicle
Inform customer of any incorrect or worn tires