31 5 150 Assembly tool

WARNING: This page is about a different variant/trim than selected.

Minimum set: Mechanical tools

Note: For removing and installing hydromounts on control arm

Series: R50, R52, R53, R55, R56

Storage location: C84

SI number: 1 16 01 (799)

Order number: 31 5 150

Assembly tool

Fig 1: Identifying Assembly Tool (31 5 150)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 31 5 151 Spindle M18/M16 length 190 mm

2 = 31 5 152 Nut M18

3 = 31 5 153 Washer

NOTE: For removal only

4 = 31 5 154 Washer

NOTE: For installation only

5 = 31 5 155 Washer

NOTE: For installation only

6 = 31 5 156 Bush

NOTE: For removal only