11 9 610 Installer

WARNING: This page is about a different variant/trim than selected.

Minimum set: Mechanical tools

Note: For installing rear shaft seal on crankshaft.

Engine: N12, N14

Storage location: C85, C86

SI number: 1 26 06 321

Order number: 11 9 610

Installer

Fig 1: Identifying Installer (11 9 610)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 9 611 Basic body

2 = 11 9 612 Pressure sleeve

3 = 11 9 613 Nut with bearing