72 11 Seat belts

WARNING: This page is about a different variant/trim than selected.

TIGHTENING TORQUES SPECIFICATION - SEAT BELTS

	Type	Thread	Tightening specification	Measure
1AZ Height adjuster, seat belt, front - to "B-pillar"	R50/R53	M8		22 Nm
2AZ Inertia reel device, seat belt, front - to "B-pillar"	R50/R53			29 Nm
	R52 / R55 / R56			36 Nm
3AZ Deflection fitting to height adjuster	R50 / R53	M10		36 Nm
to body	R55 / R56	M10		36 Nm
4AZ Seat belt, front, anchor fitting, sliding rail	R50 / R52 / R53			36 Nm
	R55 / R56		Duo-Taptite screw coated with microGLEIT DF 921	36 Nm
5AZ Inertia reel device, seat belt, rear
outer to C-pillar	R50 / R52 / R53 / R55 / R56			36 Nm
middle to side belt retainer holder	R55			36 Nm
6AZ Belt deflection fitting for rear cabin seat belt to "C-pillar"	R50 / R52 / R53 / R55 / R56			36 Nm
7AZ Anchor fitting, rear seat belt	R50 / R52 / R53 / R55 / R56			36 Nm
8AZ Buckle (lower strap), rear seat belt	R50 / R52 / R53 / R55 / R56	M10	Duo-Taptite screw	36 Nm
9AZ Lower fitting (belt tensioner), seat belt, front	R50 / R53	M10		45 Nm
	R55 / R56	M10		36 Nm
10AZ Corner hoop to body (B-pillar)	R52			25 Nm
11AZ Belt guide loop	R52			11 Nm