72 12 Airbag gas generator, unit for passenger side
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - AIRBAG GAS GENERATOR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
1AZ Passenger airbag module
|
R50 / R53 | 10 Nm | ||
| R52 | 3.3 Nm | |||
|
R56 / R55 | 9 Nm | ||
| 2AZ Self-locking nut for gas generator - ITS head airbag | R50 / R53 | 6 Nm | ||
| 3AZ Bracket for gas generator tube - ITS head airbag | R50 / R53 | 3.5 Nm | ||
| 4AZ Fastening belt to A- and C-pillars - ITS head airbag | R50 / R53 | 11 Nm | ||
5AZ Head airbag, retaining clip and panel to bracket
|
R50 / R53 | 6 Nm | ||
| Holder, folding pack for head airbag and ramp, to body (B-pillar) | R56 / R55 | 8 Nm | ||
| 6AZ Side airbag (front seat) to backrest frame | R50 / R52 / R53 | 6 Nm | ||
| R56 / R55 | 6.5 ± 0.5 Nm | |||
| 7AZ Holder, front passenger airbag to instrument panel carrier | R50 / R52 / R53 / R56 / R55 | 6 Nm | ||
| 9AZ Front passenger airbag holder to airbag module | R55 / R56 / R57 / R58 / R59 / R60 / R61 | 9 Nm |