54 12 Components of slide/tilt sunroof mechanism
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - SLIDE/TILT SUNROOF MECHANISM
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Tolerance compensation bar | R50 / R53 | M6 x 25 | 5 Nm | |
| 2AZ Mountings, front and middle | R50 / R53 | M6 x 15 | 5 Nm | |
| 3AZ Mounting, height adjustment | R50 / R53 | M6 x 25 | 5 Nm | |
| 4AZ Glass panel to mechanism | R50 / R53 / R56 | Replace screws | 4 Nm | |
| 5AZ Slide/tilt sunroof frame to body | R56 | Replace screws | 5 Nm |