51 13 Trim Parts, Covers, Handle Trim
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - TRIM PARTS, COVERS AND HANDLE TRIM
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Roof trim strip to roof | R50 / R53 / R55 / R56 | 1.5 Nm | ||
| 2AZ Retaining clip of roof trim strip to roof | R50 / R53 | 1.5 Nm | ||
| 3AZ Spoiler to rear lid | R50 / R53 | M6 | 8.5 Nm | |
| 4AZ Outer C-pillar trim to body | R55 | M6 x 13 | 4.0 Nm |