51 16 Mirrors, Finishers, Ashtrays, Consoles
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - MIRRORS, FINISHERS, ASHTRAYS AND CONSOLES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bracket, handbrake console, to tunnel | R50 / R52 / R53 | M6 | 2.5 Nm | |
| 2AZ Front center console to instrument panel cover trim | R50 / R52 / R53 | 2.5 Nm | ||
| 3AZ Mirror to front door | R50 / R52 / R53 / R55 / R56 | M6 x 65 | 8 Nm | |
| 4AZ Mounting, front center console, to body (nuts) | R50 / R52 / R53 | 2.6 Nm | ||
| 5AZ Centre armrest to bracket | R50 / R52 / R53 | 4.5 Nm |