51 23 Hood/bonnet locks
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - HOOD/BONNET LOCKS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Catches to side member |
R50 / R52 / R53 |
|
|
10 Nm |
| 2AZ Retaining hook to hood/bonnet |
R55 / R56 |
|
|
8 Nm |
| 3AZ Locks to front panel |
R55 / R56 |
|
|
10 Nm |