11 24 Connecting Rods and Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATION - CONNECTING RODS AND BEARINGS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Connecting rod bolts |
N12 |
M7x37 |
Replace, wash and oil screws |
|
| |
|
|
1. Jointing torque |
5 Nm |
| |
|
|
2. Jointing torque |
15 Nm |
| |
|
|
3. Angle of rotation |
130° |