84 10 050 Removing and installing/replacing USB hub (from version 09/2009)

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Comply with notes and instructions on handling optical waveguides . See 61 00... NOTES ON HANDLING OPTICAL FIBERS .

Necessary preliminary tasks:

Release screws (1) and (2).

Remove cover (3).

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Release screws (3).

Remove USB hub (4).

Fig 2: Removing USB Hub

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: Carry out vehicle programming/encoding.