84 21 535 Removing and installing/replacing handsfree charging electronics

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Comply with notes and instructions on handling optical waveguides . See 61 00... NOTES ON HANDLING OPTICAL FIBERS .

Necessary preliminary tasks:

Release screws (1) and remove cover (2) in direction of arrow.

Fig 1: Identifying Screws And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unscrew all bolts.

Remove hands-free charging electronics (2).

Fig 2: Identifying Plug Connection And Hands-Free Charging Electronics

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: