65 12 210 Removing and installing/replacing radio receiver - CHAMP: Notes

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on ELECTRO STATIC DISCHARGE .

Necessary preliminary tasks:

Release screws (1).

Pull out the CHAMP (2) to the front.

Fig 1: Pulling Out CHAMP To Front

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Remove CHAMP (3).

Fig 2: Identifying Plug Connections With CHAMP

Courtesy of BMW OF NORTH AMERICA, INC.