64 53... Replacing valve insert for refrigerant line
WARNING: This page is about a different variant/trim than selected.
WARNING:
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling refrigerant R 134a.
Follow safety instructions for handling refrigerant oil.
Avoid contact with refrigerant and refrigerant oil.
Refrigerant circuit is under high pressure!
Follow safety instructions for handling refrigerant R 134a.
Follow safety instructions for handling refrigerant oil.
Avoid contact with refrigerant and refrigerant oil.
IMPORTANT:
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow instructions for opening and replacing parts in refrigerant circuit!
If A/C system is opened for more than 24 hours: Replace desiccant insert for A/C system.
Restart engine only when A/C system has been correctly filled.
Follow instructions for opening and replacing parts in refrigerant circuit!
If A/C system is opened for more than 24 hours: Replace desiccant insert for A/C system.
NOTE:
The special tool is available under BMW order number:
81 34 0 427 679 from the BMW workshop equipment catalogue.
81 34 0 427 679 from the BMW workshop equipment catalogue.
Necessary preliminary tasks:
Twist valve insert out of filler neck (2) with remover (1).
Installation:
Screw in valve insert hand-tight only.
After installation:
- Evacuate and fill A/C system
- Check leak-tightness of valve insert with soapy solution
In event of leakage:
- Evacuate A/C system
- Check sealing faces on line and valve insert for damage, replace line or valve insert if necessary