63 14 120 Removing and installing or replacing rear reflector
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove splitdoor trim . See 51 13 450 REMOVING AND INSTALLING/REPLACING TRIM ON LEFT OR RIGHT SPLITDOOR .
Lever off retaining rings (1) with a suitable tool from rear reflector (2).
Remove reflector (2) towards rear from splitdoor trim (3).
Installation:
Make sure guide (4) of reflector (2) is correctly seated in splitdoor trim (3).
Reflector (2) and retaining rings (1) must not be damaged.
If necessary, replace retaining rings (1).