61 61 270 Removing and installing or replacing bracket for windscreen wiper system complete with motor

Necessary preliminary tasks: 

• Remove left cowl panel cover  . See 51 13 123 REMOVING AND INSTALLING/REPLACING LEFT COWL PANEL COVER .

Unscrew nut (1). Tightening torque 61 61 2AZ  . See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES -- CLUBMAN .

Installation: 

Make sure holder is correctly positioned in relation to grommet.

Fig 1: Identifying Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1). Tightening torque 61 61 2AZ  . See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES -- CLUBMAN .

Disconnect plug connection (2).

Remove wiper bracket.

Fig 2: Identifying Wiper Bracket Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.