61 71 004 Adjusting windscreen washer spray nozzles

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Mark contact points with adhesive tape on windscreen.

Actuate windscreen washer system.

The jet sprays must strike the areas of the markings.

Adjustment values in mm:

1 = 270

2 = 360

3 = 530

4 = 240

5 = 240

6 = 530

7 = 360

8 = 270

Fig 1: Identifying Adjustment Values Of Windscreen Washer Spray Nozzles

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, adjust left or right spray nozzle with special tool 00 9 200.

NOTE: If necessary, remove adhesive residue from windscreen.
Fill up with washer fluid.

Fig 2: Identifying Spray Nozzle With Special Tool (00 9 200)

Courtesy of BMW OF NORTH AMERICA, INC.