61 31 270 Removing and installing/replacing reversing light switch

Necessary preliminary tasks: 

N12: 

• Remove intake filter housing  . See 13 71 000 REMOVING AND INSTALLING INTAKE FILTER HOUSING (N12) .

Disconnect plug connection (1).

Release reversing light switch (2) with a suitable tool.

Tightening torque 61 31 1AZ.  See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES -- CLUBMAN .

Fig 1: Identifying Reversing Light Switch And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.