61 13 055 Removing and installing/replacing fuse box in engine compartment

Necessary preliminary tasks: 

• Disconnect battery negative lead  

Unlock catches (1) and remove fuse box cover (2).

Fig 1: Identifying Fuse Box Cover And Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove pole shoe. Tightening torque 61 13 4AZ.  See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES -- CLUBMAN .

Release screws (2). Tightening torque 61 13 1AZ.  See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES -- CLUBMAN .

Raise fuse box.

Fig 2: Identifying Fuse Box Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective cap (1).

Fig 3: Removing Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all plug connections (1) on underside of fuse box.

Replacement: 

• Remove fuses and relays
  Fig 4: Identifying Fuse Box Plug Connections

  Courtesy of BMW OF NORTH AMERICA, INC.