54 13 120 Removing and installing rear roller sun blind

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1) on left and right.

Fig 1: Identifying Rear Roller Sun Blind Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The right side is removed in the same way as the left side.

Carefully raise rear glass lid mechanism (2).

Unlock retaining lugs and lift out roller sun blind (1).

Installation:

Retaining lugs on roller sun blind must not be damaged.

Fig 2: Removing Roller Sun Blind

Courtesy of BMW OF NORTH AMERICA, INC.