54 13 052 Replacing seal on front glass lid
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Move front glass lid into fan position
NOTE:
Follow Repair Instructions
for bonded seals on glass slide/tilt sunroof.
Detach seal from glass lid.
Installation:
- Clean bonding surface with adhesive remover
- Press seal without stretching (squashing)
- Stick on seal in sections
IMPORTANT:
Do not touch bonding surface.
Surface temperature ≥ 20°C
Incorrect bonding of the seal will result in leakage.
Surface temperature ≥ 20°C
Incorrect bonding of the seal will result in leakage.