52 26 751 Replacing Bowden cable for left or right rear seat backrest

Necessary preliminary tasks: 

• Remove BACKREST COVER 

Release screws (1).

Tightening torque: 19 Nm

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable (1) and feed out from rear seat backrest lock.

Fig 2: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Feed Bowden cable (2) out of grip recess plate (1).

Fig 3: Feed Bowden Cable (2) Out Of Grip Recess Plate (1)

Courtesy of BMW OF NORTH AMERICA, INC.