51 76 020 Removing and installing/replacing seal on left splitdoor

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Remove PANEL FOR LEFT SPLITDOOR

NOTE: Seal (1) is secured in area of rear window with double-sided adhesive tape.
Release seal (1) from adhesive tape (2) and pull off in direction of arrow.

Installation:

Follow INSTRUCTIONS for sticking components with double-sided adhesive tape.

Fig 1: Releasing Seal From Adhesive Tape And Pull Off In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

Release seal (1) in direction of arrow.

Fig 2: Releasing Seal In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.